What This Kit Offers
The Aoshima ACKS series brings you the Mechagodzilla MFS-3 Kiryu from the 2002 film Godzilla Against Mechagodzilla. Designed under the supervision of the film's designer, Mr. Shinji Nishikawa, this model kit captures the on-screen mech with fine detail. It uses color-molded parts and snap construction, so no cement or paint is required for assembly. The finished model stands approximately 24 cm tall, making it a substantial display piece.
Key Specifications
- Aoshima "Godzilla Against Mechagodzilla" - Mechagodzilla MFS-3 "Kiryu" Model Kit: Height approximately 24 cm after assembly Plan your display space before you start building.

Aoshima "Godzilla Against Mechagodzilla" - Mechagodzilla MFS-3 "Kiryu" Model Kit - Aoshima "Godzilla Against Mechagodzilla" - Mechagodzilla MFS-3 "Kiryu" Model Kit: Snap construction, no cement required This kit is beginner-friendly and can be assembled right out of the box without glues or solvents.
- Aoshima "Godzilla Against Mechagodzilla" - Mechagodzilla MFS-3 "Kiryu" Model Kit: Color-molded parts The plastic parts are molded in the correct colors, so painting is optional. You can add detail work later if you choose.
- Aoshima "Godzilla Against Mechagodzilla" - Mechagodzilla MFS-3 "Kiryu" Model Kit: Includes optional accessories and movable parts You can pose the model and equip it with accessories to recreate scenes from the film.
- Aoshima "Godzilla Against Mechagodzilla" - Mechagodzilla MFS-3 "Kiryu" Model Kit: Box packaging newly illustrated by Mr. Nishikawa The box art itself is a collector's item, adding value for fans of the designer.
Assembly Steps for the Kiryu Kit
The following order is based on typical snap-fit model kit practices. Since the kit uses snap-fit joints, you can test-fit parts before final assembly.
- 1. Prepare your workspace: Clear a flat, well-lit area. Have a pair of sprue cutters and a hobby knife ready to remove parts from the runners. A small file or sanding stick helps clean nubs.
- 2. Organize the runners: Lay out the runners by color. The kit is color-molded, so sorting helps you find parts quickly. Refer to the instruction sheet for part numbers.
- 3. Assemble the torso and core structure: Start with the main body frame. Snap-fit the internal skeleton parts first; this gives you a stable base for the armor panels.
- 4. Attach the armor panels: Once the core is together, add the color-molded armor pieces. Because no cement is needed, you can disassemble and reposition if needed.
- 5. Build the head and chest details: The head unit includes the distinctive Kiryu face and chest cannons. Fit these carefully to ensure alignment with the body.
- 6. Assemble the arms and legs: Each limb is built separately and then attached to the torso. The movable joints allow posing after assembly.
- 7. Add optional accessories: The kit includes optional parts for recreating film scenes. Attach these after the main build is complete.
- 8. Final inspection and pose: Check all connections are snug. Pose the model on a shelf or in a display case. The approximate 24 cm height works well in a standard detolf or cabinet.
Tips for a Clean Build
Because the parts are color-molded, you can skip painting entirely. If you want to add panel lining for extra detail, use a fine-tip marker or wash. Test-fit joints before pushing them fully together; snap-fit connections can be tight, and once fully seated they may be difficult to separate. The movable parts allow dynamic poses, but avoid over-stressing joints when changing positions.
What the Supplied Information Does Not Confirm
The catalog does not specify the number of runners, the total part count, or whether decals are included. It also does not list a recommended age range or any safety warnings. For these details, refer to the product packaging or contact the manufacturer. The assembly steps above are based on general snap-fit model kit practices and the known features of the Kiryu kit.

